Ridgefield · Vancouver · Battle Ground · Camas · all of Clark County Free estimates · (360) 600-7880

Paver Patios & Walkways in Battle Ground, WA

Room to build, and driveways that carry weight. Interlocking paver patios, walkways and driveways built on an open-graded base that survives Clark County winters.

Free Estimate in Battle Ground

Paver Patios & Walkways in Battle Ground: what is different here

Battle Ground lots, particularly outside the city limits, give us room to work. Patios here are frequently larger, and more often connected to something else — an outdoor kitchen, a fire pit area, a path out to a shop or barn.

We also do a lot of paver driveways and RV parking aprons around Battle Ground. Those are a different build from a patio: deeper base, heavier compaction, and a thicker paver rated for vehicle load. A patio-spec base under an RV pad will rut, and it is one of the more common failures we get called out to repair.

On acreage, the drainfield governs. We locate the septic field and its reserve area before laying out anything, because hardscape over a drainfield is not something you can undo cheaply.

How we build it

  • Excavation to proper subgrade for the intended load
  • Geotextile separation fabric on clay and wet sites
  • Compacted base in lifts, not a single deep pour
  • Saw-cut perimeter and spiked edge restraint
  • Polymeric jointing sand, compacted and set
  • Positive drainage pitched away from the house

A paver patio is only as good as what is underneath it. Most of the failed patios we get called out to repair in Clark County look fine the day they were finished — they sank two winters later because somebody laid pavers on four inches of loose sand over clay. We build the base first and the pretty part second.

Roughly 20 minutes east of Ridgefield. Estimates in Battle Ground are free, and the price we put in writing is the price.

Full detail on how we build paver patios & walkways · Everything we do in Battle Ground

Paver Patios & Walkways we have built

Paver edging set before fresh sod is rolled into place
Paver walkway and planting bed running along the side of a house
Paver walkway with a block retaining edge leading to a driveway
Large paver patio with a decorative gravel border and iron railing
Paver patio base prepped with pallets of stone staged for installation
Completed paver patio in a fenced Clark County backyard

Paver Patios & Walkways in Battle Ground: questions we get

How long does a paver patio take to install?

A typical 400 to 600 square foot residential patio runs three to five working days once we start, assuming reasonable access and no weather delays. Larger builds with walls, steps or an outdoor kitchen run one to three weeks.

Pavers or stamped concrete — which is better here?

Pavers, in most Clark County yards. Our clay soil moves seasonally, and a poured slab is one rigid piece that cracks when the ground under it shifts. A paver field is thousands of small pieces that flex with the ground and can be individually lifted and reset. Stamped concrete looks great and costs less up front, but it is far harder to repair.

Do I need a permit for a patio?

A ground-level patio usually does not require a building permit, but jurisdictions in Clark County differ, and impervious surface limits, setbacks, easements and HOA rules can all apply. If your project touches any of those we will tell you during the walkthrough so you can confirm with your city or the county before we start.

Paver Patios & Walkways in Battle Ground

Free on-site estimates across Clark County. We walk the property with you, tell you what it actually needs, and put a fixed price in writing.

Call (360) 600-7880 Free Estimate